Dcutile Iron Pipes

Specifications: 
1) The standard of pipe: ISO 2531 - 1998, EN545-2002 K9 
2) Effective length: 6M when using bulk shipment way, or about 5.5M or 5.7M when in 20' container shipment way 
3) Inner cement line: Portland cement line as per ISO4179 

4) Zinc coating: At least 130GSM as per ISO 8179 
5) Bitumen painting: At least 70um as per ISO 8179 
6) Gaskets are NBR rubber, natural rubber, SBR rubber or EPDM rubber tightness ring as per ISO4633 
7) DN 80 - 1, 600 mm 
8) High strength, lighter than gray iron, good corrosion resistance, no furring, small flow resistance, easy fixing, long life time 
9) Checked by automatic inspection equipment 
10) Composition: 
A) C: 3.4 - 3.7% 
B) Si: 2.0 - 2.4% 
C) P: <0.08% 
D) S: <0.015 
11) Pull strength: >420MPa 
12) Yield: >10% 
13) Hardness: <230HB 
14) K type mechanical joint with flange and bolts available 
15) Process and testing: 
A) Blast furnace (Analysis of raw materials test ) 
B) Mg treatment (Micro & chemical composition test) 
C) Pipe spinning (Temperature test) 
D) Heat treatment (Micro structure; Flattening test) 
E) Zinc coating (Thickness testing) 
F) Dimensional checks (Thickness & Dia. Testing) 
G) Hydraulic test (Pressure test) 
H) Internal lining (Thickness testing) 
I) External coating (Thickness test)